Product Description

Abutment Level Impression (Close Tray)

1. Connect the impression coping to the abutment.
2. Inject the impression material and record the impression.
3. After the impression material sets, remove the impression and disconnect the impression copings. Attach the abutment replicas to each coping.
4. Connect the temporary restoration or healing cap and send the impression to the dental laboratory.

Abutment Level Impression (Open Tray)

1. Connect the impression coping on to the abutment and tighten using the Star Screwdriver.
2. Relieve and perforate the impression tray to allow for full seating of the tray and protrusion of the guide pins. Verify that there is access to the tops of all guide pins to at least the level of the impression
tray opening. If there is a large opening, close it with base plate wax using the guide pins indenting or by perforating the wax.
3. Inject impression material and fully seat the impression tray so the tips of all the guide pins are identified. After the impression material sets, unscrew the guide pins and remove the impression tray.
4. Place the impression coping abutment replica assembly into its corresponding location in the impression.
5. Connect the temporary restoration or healing cap and send the impression to the dental laboratory.

Brand

Additional Information